Nostalgia Electrics Vintage Serie Instrucciones Y Recetas página 8

(E) Push Handle
(I) Cross Bar
ASSEMBLY OF BASE SUPPORT
1. Insert Cross Bar (I) into the square inserts on the inside of Base Support (G)
and secure from below with two #2 Bolts and two #5 Flat Washers.
2. Insert the Leg Assembly (H) into the square inserts between the ends of
the Base Support (G) and fasten from inside with two #4 Bolts, two #6 Flat
Washers and two #7 Nut Caps and from the top with two #2 Bolts.
(F) Wheels (G) Base Support
(J) Screwdriver (K) Wrench #1 (L) Wrench #2
(H) Leg Assembly
6