Installing The Switch Cup Cover - Famination Distinction A1 Serie Manual Del Propietário

1. Remove one of the three screws in the support-
bracket. Slightly loosen the remaining two screws.
Assemble the adapter-switch housing assembly to
the housing support bracket using the two key
slots in the adapter-switch housing. Replace the
third screw and securely tighten all three screws.
(Figure 1)
2. Remove one of the two screws in the
adapter-switch housing assembly and retain the
screw. Slightly loosen the other screw. (Figure 2)
3. Assemble the inner-switch housing assembly to
the adapter-switch housing assembly using the
key slots. Replace the screw and securely tighten
all two screws. (Figure 3)
4. Assemble the switch housing cover to the
inner-switch housing assembly by twisting in a
clockwise direction. (Figure 4)

Installing the Switch Cup Cover

Adapter-Switch
Housing Assembly
Adapter-Switch
Housing Assembly
Inner-Switch
Housing Assembly
15
Figure 1
Figure 2
Figure 3
Inner-Switch
Housing Assembly
Switch Housing
Cover
Figure 4