Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
26
Problem
The appliance does not turn
on.
Juice will not flow through
outlet.
The appliance does not press
the fruit.
•
Make sure it is plugged in.
•
Make sure the safety circuit breaker is closed.
•
Make sure the start button on the appliance is turned ON.
•
If the problem occurs itself after a long period of intensive
use or overfilling, the motor could be in thermal protection
lock! Wait at least 20 minutes and try again. The waiting
time can be reduced by putting the appliance in a cool
place.
•
Check that the splash cover is in the working position:
"three drops" symbol at the top.
•
Check to see if sieve or juice outlet is plugged with seeds or
pulp from the last use.
•
Make sure enough pressure is applied to fruit during
operation.
•
Make sure the auger is pushed all way down onto the motor
shaft.
Solution
GB
Publicidad
Tabla de contenido
