Descargar Imprimir esta página

Instrucciones De Ensamblaje - Barrington Billiards SOC054_117B Instrucciones De Ensamblaje

Publicidad

English
SOC054_117B PARTS LIST / LISTA DE PARTES
FOR FIG. 10
33
Triangle Board
Tablero Triángulo
33
Soccer Ball
Bola de Fútbol
SOC054_117B PRE-INSTALLED PARTS / PIEZAS PREINSTALADAS
FOR FIG. 6
P1
Cubierta de
Ball Return Cover
Retorno de Bola
FOR FIG. 2
P5
Plastic Ball
Llanta de Entrada
Entry Rim
de Pelota Plástica
IMPORTANT NOTICE! Do Not Return This
Product To The Store.
Please Keep Your Instructions! Your Model number is
necessary should you need to contact us. Please read
through this instruction manual book to familiarize
yourself with all parts and assembly steps. Kindly refer
to the parts list below and be sure that all parts have
been included.
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your
Product.
2. Remove all the parts from the box and verify that you
have all of the listed parts as shown on the Parts list
pages. Carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work
surface.
SOC054_117B
34
x4
4X12mm Screw
Tornillo 4X12mm Triangle Board Cap
x2
P2
x2
Goal Cover
Cubierta de Gol
P6
x2
6mm Nut
6mm Tuerca
(Continued on the next page.)
FOR FIG. 10
35
x4
FOR FIG. 2
P3
x2
Square Nut
with Screws
FOR FIG. 5
x16
¡Aviso Importante! No devuelva este
producto a su local de venta.
¡Por favor guarde las instrucciones! Es necesario el
número de modelo para contac tarse con nosotros.
Por favor léa las instrucciones para poder familiarze
con las piezas y los pasos para armar. Corrobore
que todas las piezas que aparecen en el "Lista de
Partes" se encuentren en el paquete.

INSTRUCCIONES DE ENSAMBLAJE:

1. Encuentre un lugar limpio y nivelado para comenzar el
ensamblaje de su producto.
2. Retire todas las piezas de la caja y verifique que cuente
con todas las piezas enumeradas en las páginas de la
Lista de piezas. Corte o rasgue cuidadosamente las
cuatro esquinas de la caja de modo que el fondo de la
caja pueda ser usado como su superficie de trabajo.
3
FOR FIG.10
36
x4
La Gorra del
Stop Ring
Tablero Triángulo
FOR FIG. 9
P4
x4
Tuerca Cuadrada
Plastic Rod
con Tornillos
Bushing
(Continúe en la siguiente página.)
Español
FOR FIG.11
x4
Anillo de Parada
FOR FIG. 2
x16
Cojinete de Barra
Plástica
www.themdsports.com

Publicidad

loading