8dTek COMBO JET TSM8800 Manual Del Usuario página 23

T M
AD INSTRUMENTS
BROWSE: Browse the saved spectrum data for review.
4.F2: to change the AGC reference
5.Green axis indicates focal frequency, can be moved by up & down Key
for faster movement or by left & right keys for slower movement.
6.Top marker will be shown on the high level position of spectrum.
7.Move the green column to the peak
5.LNB STATUS: reference to the LNB connection status.
TIPS: The signal level of each frequency is displayed vertically, the lower
frequencies appear at the left of the screen and the higher ones at
the right. The spectrum level will increase suddenly to a certain
data, and cover for a certain width, it will means that a transponder
signal. A transponder spectrum data will cover a certain width, and
the spectrum level will increase suddenly to a certain width.
DVB-T SPECTRUM
Press SPCM key to access the spectrum analyzer function. The spectrum
signal is shown as <Figure2-27>
1.F2: to change the AGC reference
2.F1: to view the options, see <Figure2-28>
and press OK to scan out the channels.
<Figure2-27>
DTVLINK
20