Adjusting Tension; Controlling The Sewing Speed - Dyno EasyStitcher Manual De Operación

The EasyStitcher™ has been adjusted for maximum performance so it is unlikely that
you will need to adjust the tension. However, if over time you find that your stitches
are too loose or too tight, you can adjust the tension.
1. To loosen the stitch, turn the Tension Adjusting Screw (X) to the left.
2. To tighten the stitch, turn the Tension Adjusting Screw (X) to the right.
Note: Loosening the stitch may be required when sewing heavier fabric; tightening
when sewing lighter fabric.

Controlling the Sewing Speed

1. In the High (fast) position the switch is out; in the Low (slow) position, the switch is in.
2. We recommend using the Low (slow) speed as you get comfortable with your
EasyStitcher™. As you gain experience and confidence in controlling the machine,
we recommend trying the High (fast) speed for faster stitching.
Stitch Length Adjustment and
1. For a longer stitch, move the Stitch Length Adjustment Button (J) to the right. A
longer stitch is recommended for normal sewing.
2. For a shorter stitch, move the Stitch Length Adjustment Button (J) to the left.
3. When stitch Length Adjustment Button is in the stop position, machine will not
sew even though needle is moving.
4. To sew in reverse, push the Reverse Control Lever (N) down.
6

Adjusting Tension

Reverse Stitching
Stop Position