Instructions Manual
Lighting replacing
-
Disconnect the electric plug of the unit.
-
Release the lamp from its support and replace the
damage lamp.
-
The light switch is on the control panel on the
lower part of the equipment.
Units with remote condensing unit
-
If your unit has an air condensing unit at distance, all the advises about
the ventilation of the incorporated condensing unit are no longer valid,
however we keep adverting that the condensing unit should be placed on
a fresh spot and with a good air circulation. All other advises and cares
must be respected, in order to get all the performances for which the
equipment has been developed.
Mural Columbus
EN
26