ZebraBlinds Cordless Faux Wood Manual Del Usuario página 5

Cordless
Faux
Wood
Blind
For 2 Blinds-in-1 Window – The valance will be in two sections.
Butt the two valance sections together using the metal joiners as
illustrated.
Step 5. Inserting the Head Rail
Slide the head rail onto the brackets, and then snap-close the hinged
retainer caps of the end brackets.
Step 6. How to Operate
Operating & Care Instructions for Cordless Blinds
• Always rotate the slats to the "open" horizontal position
before raising or lowering. This assures smooth operation and
increases the life of the blind.
• To maintain optimal performance of the springs that make your
cordless blind function, lift and lower your blind through its
full range of motion – all the way up and all the way down - as
frequently as possible
• Always raise and lower the blind SLOWLY(!) to assure that the
slats stack neatly. To lower the shade: grip the bottom rail with
both hands and slowly pull straight down. To raise the shade,
put both hands under the bottom rail and push up slowly.
• Always keep the bottom rail level.
IMPORTANT
READ CAREFULLY
5