Creating Standards - VINVENTIONS Wine Quality Solutions NOMASense Color P100 Guia Rápido

5. Creating Standards

1. Select the Standard icon in the function bar by pressing on the right or left side of the
Navigation control.
2. Press the up and down sides of the Navigation control to select the next available
standard location.
1. Press the left side of the Navigation control (Edit) to enter the Edit Standard screen. If
your device has security enabled you will be prompted to enter the password "999" to
unlock.
2. Preview your sample by lightly pressing then firmly to Measure.
Note: If you do not want the current measurement to be used, use the Navigation
control to select Reset and press the Enter (Select) button.
3. Continue with additional measurements to obtain an average value if standard averaging
is activated in the Settings (default setting is 3).
Simulated Color
Standard data
4. When finished, press the left side of the Navigation control (Save) to save the new
standard.
NomaSense Color P100
Standards active for auto selection
Star indicates selected standard
for QC measurements
Available standard location
7
Reset