Urrea BAT20U Manual De Usuario Y Garantía página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Charge the battery pack with the correct
charger.
2. Connect the charger to a power supply .
3. Attach the battery pack to the charger by
aligning the raised ribs of the battery pack with
the slot in the charger. Slide the battery pack
onto the charger.
4. The charger will communicate with the bat-
tery pack's circuitry to evaluate the condition of
the battery pack.
5. During normal charging, the green LED on
the charger will flash continuously.
6. After charging is complete, the green
LED on the charger will be on. The power indi-
cator LED lights will not be displayed when the
power indicator button is pressed while the bat-
tery pack is on the charger.
7. The battery pack will fully charge, but will not
overcharge, if left on the charger.
HOW TO KNOW THE CHARGE CONDITION OF
BATTERY PACK DURING CHARGING
The LED lights on the battery pack are displayed
as the pack is being charged, indicating how
fully charged the pack is.
The first LED light on the battery pack flashes
to indicate that the battery pack is 0%-25%
charged.
The first LED light on the battery pack is solid
and the second flashes to indicate that the bat-
LED INDICATOR
Hi /Low temp.
Defective battery
Battery charging
Battery full
12
BATTERY PACK
Hot/Cold battery
Defective
Charging
Fully charged
tery pack is 25%-50% charged.
The first two LED lights on the battery pack are
solid and the third flashes to indicate that the
battery pack is 50%-75% charged.
The first three LED lights on the battery pack are
solid and the fourth flashes to indicate that the
battery pack is 75%-100% charged.
When it is fully charged, all the LED lights on the
battery pack will be solid for about 30 minutes
then will turn off.
LED FUNCTIONS OF CHARGER (FIG. 4) CHARG-
ING A HOT BATTERY PACK
If the battery pack is above the normal tempera-
ture range, the red LED will illuminate and the
green LED will be off. When the battery pack
cools down to approximately 122°F, the charger
will automatically begin charging.
CHARGING A COLD BATTERY PACK
If the battery pack is below the normal tempera-
ture range, the red LED will illuminate and the
green LED will be off.
When the battery warms to a temperature of
more than 41°F (5°C), the charger will automati-
cally begin charging.
DEFECTIVE BATTERY
If the charger detects a problem, the red LED
will begin flashing and the green LED will be
off.
RED LED
GREEN LED
On
Off
Flashing
Off
Off
Flashing
Off
On
ACTION
Fast charge will begin when
battery returns to between
50°F (10°C) and 104°F (40°C)
Battery pack or charger is
defective
Charging
Charging is complete

Publicidad

Tabla de contenido
loading

Tabla de contenido