Qiachip KR1201A Manual De Instrucciones página 5

Function description and setting method
* Note: All the following working modes need to be implemented with
QIACHIP remote control (transmitter) and controller (receiver / wireless
remote control switch). There is no guarantee that remote controls from
other brands will work properly with our product.
Clear all matched remotes. When the data is cleared, all remote control can't
Reset function:
make receiver work.
After pressing the receiver's learning button 8 times, the receiver clears all
Settings reset:
remote control data in its memory. When the receiver's LED light flashes, the
reset function is complete.
Description of the three working modes :
Working modes: 1) Momentary; 2) Toggle; 3) Latching;4)Delay.
After successful pairing in this mode, press and hold the remote control button
1) Momentary mode:
(such as A), the corresponding relay on the receiver is turned on; release the
remote control button (such as A), and the corresponding relay on the receiver
will turn off.
After successful pairing in this mode, press the remote control button (such as A)
2) Toggle mode:
to turn on the corresponding relay on the receiver; press the remote control
button (such as A) again to turn off the corresponding relay on the receiver.
After successful pairing in this mode, press the remote control button (such as A),
3) Latching mode:
the receiver relay corresponding is turned on; press the remote control button
(such as B), the relay on the receiver corresponding is turned off.
After successfully pairing in this mode, press the button (such as A) on the
4) Delay mode (timed):
remote control to turn on the corresponding relay on the receiver. Press the
remote control button (such as A) again, the corresponding relay on the receiver
will be delayed; (press the receiver button 4 times to pair, delay 5S to close the