Strong Racks SR600R Manual De Instrucciones página 9

Determine your ceiling support system.
placement, you may need to enter your attic. You may also need to consult your builder or a
licensed contractor. As an additional resource, refer to Appendix I. Tip: The direction of your
ceiling outlets will indicate the direction of your trusses, just as the location of your garage door
support will indicate the location and spacing of your trusses.
Determine what section of the garage will house your new Strong Rack. Utilize the Rack
Placement Guide to map out your rack space. The four tacks represent each corner of the 4'x8'
unit. Sound measurements are essential; be sure to use a uniform structure as your starting
point. Each tack should be exactly the same distance from the chosen structure. Make sure
there are no obstructions within the designated space (i.e., lights, attic door, sprinklers, etc.). If
you have cabinets in your garage, make sure there is adequate clearance for doors to open.
1
To understand your truss direction, spacing or
2
9