Lullaby 616 Manual De Instrucciones página 16

6. MAINTENANCE
7. TROUBLESHOOTING
5
Before carrying out any work on the appliance:
6.1 Ensure that the main switch on the side of the quartz sterilizer is
turned OFF.
6.2 Ensure that the plug is disconnected from the mains socket.
6.3 Wait for the appliance to cool before starting any work.
6.4 Remove the quartz beads.
If the blue indicator light (4) does not flash when the main switch
(3) is pressed:
7.1 Check that the plug is connected properly to the mains socket.
If the sterilizer does not heat up when button 5 is pressed:
7.2 Check that the main switch (3) is ON (the blue indicator light
should flash)
IMPORTANT: If the sterilizer still does not work after carrying out
the checks described, contact your nearest service centre.
GB