Spare Parts; Technical Data; Pos - weeddevil 200 097 700 Instrucciones De Servicio

User Manual of weeddevil device for weed control
weeddevil professional surface cleaner for sustainable weed control
product code: 200 097 700

Spare parts

item product code description
1 070003191
2 57049
3 200009525
4 582039
5 040003206
6 200097401
7 200097402
Important things to know about
thermal weed control
Mode of action: In addition to steam and burning the
use with hot water is twenty times as effective due to the
high conductivity. Hot water does not only remove the
plant`s surface but also the root. The plant proteins are
destroyed at a temperature of 42 °C.
Application: 3 to 4 applications are recommended du-
ring the fi rst year. The number of applications during the
second year can be signifi cantly reduced as the plants
are very weak. Visible results are noticed only after a few
days.
Recommendation: The application is most effi cient
if it is effected in the afternoon as the plant is more
vulnerable after the absorption of water. Please start the
applications in the spring as the young and still small
parts of the plants are more sensitive in this season.
Please move the weeddevil slowly over the areas to be
treated and repeat the process after a few days in case
of older plants.

Technical data

model
max. pressure
max. temperature
working temperature
working width
connection at the hp-gun
required nozzles
weight
page 3, vers. 2016-07
pipe with handle ø16x3x1,100 mm bent
double nipple 1/4" M stainless steel
vented handle ST-9 with lateral grip
swivel connector 1/4" stainless steel
housing of weeddevil 400 mm
repair kit nozzle spray bar weeddevil
repair kit wheel/bolt/screws/O-ring
weeddevil

Pos.

Artikelnummer
1 070003191
2
3 200009525
4
5 040003206
6 200097401
7 200097402
200 097 700
350 bar
120 °C
90 - 99 °C
400 mm
1/4" F
4 x 1/4" M
spray angle:
65°
7.4 kg
Bodenreiniger ST-97
7
5
Benennung
Griffrohr ø16x3x1.100 mm gebogen thermal
57049 Doppelnippel 1/4 AG Edelstahl
hot water hot foam hot steam
Halbschale ST-9 mit seitlichem Handgriff
Hot water of Use of Cursory
90 to 99 °C steam with control/
582039 Überwurfverschraubung 1/4" Edelstahl
denatures foam under killing of the
Gehäuse weeddevil 400 mm
leaves and 100 °C. plant. Roots
Repair-Kit Düsenaufnahme Weeddevil
roots by the The foam survive
damage of minimises
Repair-Kit
proteins the cooling
Rad/Aufnahme/Schrauben/O-Ring
of the steam
weeddevil
Highly Highly Highly
effective effective effective
weakening / weakening / weakening /
destruction destruction destruction
of the plant of the plant. of the plant.
and root. The steam The steam
Possible does not does not
in critical/ reach the reach the
demanding root. Possib- root. Possib-
areas le in critical/ le in critical/
demanding demanding
areas areas
Up to 4 4 to 6 application
times a year, applications every 4
fewer after weeks
✰✰✰ ✰✰ ✰✰
environmental protection (also noise pollution)
✰✰✰ ✰ ✰✰✰
✰✰✰ ✰ ✰✰
Ersatzteilzeichnung
Artikel-Nr. 200097700
4
2
6
Methods of weed control
mechanical
hot air fl ame weed brush
Cursory Cursory Cursory cut-
control/killing burning of ting off of the
of the plant the plant plant. Roots
at more at more survive
than 350 than 400
°C. Roots °C. Roots
survive survive
Mode of action and characteristics
Highly Highly Cutting of
effective effective the plant.
weakening / weakening / Spreading of
destruction destruction the seeds.
of the plant. of the Fast growing
Hot air does plant. The again and
not reach fl ame does spreading of
the root. not reach the weed
Ineffi ciency the root.
in case of Ineffi ciency
humidity in case of
humidity,
hazard in
case of
drought
Frequency of application
application application application
every 4 every 4 every 4
weeks weeks weeks
Sustainability and effi ciency
✰ ✰
✰✰ ✰
evaluation
✰ ✰
www.rm-suttner.com
3
1
chemical
spraying
Herbicide is
applied by
the sprayer.
The roots
are killed
Highly
effective
destruction
of the plant
and root.
Compliance
with legal
application
rules. Se-
veral plants
are already
immune.
1 to 4
applications
a year
✰ ✰✰✰
✰ ✰
✰ ✰✰