Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
B) Vinyls (Adherence)
1.
Turn ON the heat press to adjust temperature and time of the process.
2.
Wait until the heat press reaches the correct temperature.
3.
Place the garment on the base, try to leave no wrinkles.
4.
Place your design on the garment.
5.
Use the handle to carefully lower the heating plate.
6.
Wait until the countdown finishes.
7.
Use the handle to raise the heating plate and remove the garment from the base.
8.
Remove the excess material to finish the process.
25
Publicidad
Tabla de contenido
