Disposal Instructions; Frequently Asked Questions - Mobinnova Beam BEAMATT-1198523 Guía De Usuario

but not always, clearly marked. They include below
deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane
or butane), near gas pumps at service stations, and in
areas where the air contains chemicals or particles such as
grain, dust ,or metal powders. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even
death.

Disposal instructions

Follow your local environmental laws and guidelines to
properly dispose of your device. To minimize pollution and
promote a greener earth, we encourage you to recycle.
Contact your local government office for information on
recycling electronic products.
22

Frequently asked questions

Why won't my device boot up?
– First check to ensure that your AC power adapter is
properly plugged into the device and the power outlet.
– If you are using a battery, it may be low and unable to
power the computer. Plug the AC power adapter into your
device and the power outlet.
Why won't my device shut down?
– To shut down your device, you need to press the power
button for more than 2 seconds. The green light should
turn off once it has powered down. If the green light is still
on, the device is in "sleep" mode.
Why isn't anything displaying on my screen?
– To conserve power, the device automatically blanks the
screen if you have not used it for a period of time. Press
any key or touch the touchpad to turn on the display
again.
– If the screen is still blank, the brightness level may be too
low. Use the brightness controls to adjust the display.
Why can't I hear the audio?
– The volume may be muted or too low. Use the mute
feature and volume controls to adjust the audio level.
What should I do if my device isn't running properly or my
applications stop working?
– Press the power button for more than 6 seconds to shut
down the device. Wait a few seconds before turning on
the device.
FCC Regulations:
• This mobile device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
• This mobile device has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiated radio frequency energy and, if not
23