Mobinnova Beam BEAMATT-1198523 Guía De Usuario página 4

Touchpad
The touchpad enables you to move the cursor pointer
around on the screen by lightly touching the pad and tracing
the direction you want the pointer to go.
To select an item, lightly tap the touchpad. You can also
press firmly on the left "L" and right "R" sides of the
touchpad itself.
Installing SIM card
1. Be sure the device is powered off and the power cord is
not connected to device.
2. Find the SIM card slot on the device's right side. Open it
by pulling it downwards.
6
3. Insert the SIM card into the slot with the metal contacts
face up and the notch towards the front of device
(see diagram).
4. Close the SIM card door.
(if not done at factory or in store)
Turning on device
1. Plug the power cord into the AC adapter.
2. Plug the power cord into the electrical outlet.
3. Flip down the battery bar at the back of device.
4. Plug the AC adapter into the device's external power port
(see photo).
5. The battery fully charges in about 3 hours, but within 15
minutes of connecting it to the power source, the device
is ready to turn on.
6. Open the screen lid (screen must be open to turn
on device).
7. Press the power button (right side of battery – see photo)
for less than 2 seconds.
8. The Mobinnova logo should appear on screen after a
few seconds.
NOTE: After the battery is charged, device can be used
without power cord until battery power runs out.
7