Verificación De Parámetros Del Termostato A419 - Ecochillers Ecogreen A Serie Manual Del Usuario

Verificación de parámetros del termostato A419
Display
Symbol
Setpoint*
SP
Differential*
dIF
Anti-short Cycle
ASd
Temperature
OFS
Sensor Failure
SF
Operation
Temperature
°F or °C
Temperature
Offset Indicator
BIN
Cooling or
Heating Mode of
The sum of the Setpoint and Differential values must be within the Setpoint range, or the control may not
Ramón Corona 645 B
Santa Anita, Tlaquepaque
Jalisco, México C.P. 45580
ecochillers.net
Control
Function
-30 to 212 – °F (-34 to 100 – °C)
1 to 30 – (F° or C° in 1-degree increments)
0 to 12 – (in 1-minute increments)
Delay
0 to 50 (F° or C° in 1-degree increments)
Offset
(No range)— 0 = output relay de-
1 = output relay energized
Units
(No range) – BIN is displayed and the A419
control operates on the sEcogreen ndary
setpoints when the circuit between the BIN
and COM terminals is closed.
(No range) – (Cooling Mode) is displayed
when the Jump1 jumper is removed.
(Heating Mode) is displayed when the
Jump1 jumper is
function properly
Ecochillers Inc.
WATER COOLED CONDENSING UNITS
ECCUW Model SERIES A, MANUAL
Range – Units/Value
energized
(No range) – F° or C°
installed.
USA, Canada and Europe
515 Congress Avenue Suite 2300
Austin, TX. 78701
Factory Ecogreen
Set compresors
Inc.
Value
30 6°C
5
1
0
1
F°
N/A N/A
Cooling Cooling
Mode Mode
ecochillers.com
1
12
0
1
C°