Setup; Setup Location Requirements; Assembling The Accessories - Caso Germany Coffee One CJ-633C Manual Del Usuario

Returning the packaging back to the material loop saves raw materials and reduces
the quantities of accumulated waste. Take any packaging materials that are no
longer required to "Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the
guarantee period of the device, in order that the device can be re-packaged
properly in the event of a guarantee claim.

12.5 Setup

12.5.1

Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup
location must fulfil the following prerequisites:
• Only use this coffee maker on a flat, stable, heat-resistant surface away from water
splashes and any heat sources.
• Choose the setup location in such a way that children cannot reach any hot surfaces
on the device.
• Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
• The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
• The installation and assembly of this device in non-stationary setup locations (e.g. on
ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.

12.6 Assembling the accessories

caso
Please note
Put the filter holder in the device so that the handle
is at position "open".
34