Gas Spring Mechanism Chaiselong; Adjustment Of The Handle Tension - FLEXLUX Clement Instrucciones De Uso

Gas spring mechanism chaiselong

Clement Chaiselong · Volden Chaiselong
3.
2.
1.

Adjustment of the handle tension

Gas spring mechanism · Built-in manual · Chaiselong
The gas spring
mechanism
26
!
The wire
Gas spring mechanism chaiselong
Clement Chaiselong · Volden Chaiselong
Adjustment of the seating position
1. Pull the handle to activate the gas spring system.
! Do not use unnecessary force when using the handle. Otherwise you might irreparably damage the
chair.
2. At the same time, lean on the back and it will move backwards. Release the handle at the desired position.
To bring the back forwards, pull the handle without putting pressure on the back.
3. The headrest can be pulled up, pushed down and tilted forwards.
! You have to tilt the headrest to it's most forward position before you can tilt it back again.
Do not use unnecessary force when adjusting the headrest. Otherwise you might irreparably damage
the chair.
Adjustment of the handle tension
Gas spring mechanism · Built-in manual · Chaiselong
Over time, the wire connecting the handle to the gas spring might lose tension. To retighten the wire, you
simply turn the adjustment nut underneath the chair.
For fully upholstered versions, simply unzip the cover underneath the chair to gain access to the wire.
On the Chaiselong chair the legs has to be dismounted to access the wire.
* UNDERNEATH THE CHAIR
27