Gravity Base; Build-In Electric + Battery - FLEXLUX Clement Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Gravity base

Aarhus · Skagen
!
1.
4.

Build-in electric + battery

Clement Function · Volden Function · Marina
1.
3.
28
!
3.
2.
!
2.
Gravity base
Aarhus · Skagen
Adjustment of the seating position
1. To recline: Lean backwards and the back will recline and the seat will slide forward. Stop when you reach
the desired position.
2. If the motion is not easy and smooth, or the chair does not maintain its position, then tighten or loosen the
handles on both sides simultaneously and with equal force.
! Note that the two handles operate in opposite directions of each other.
! The handles do NOT lock the chair in a fixed position, but adjust the gravity-based recline system to
your weight and height.
! Do not use unnecessary force when operating the handles and do not turn handles further than
where they stop naturally. Otherwise you might irreparably damage the chair.
3. The headrest can be pulled up, pushed down and tilted forwards.
! You have to tilt the headrest to it's most forward position before you can tilt it back again. Do not use
unnecessary force when adjusting the headrest. Otherwise you might irreparably damage the chair.
4. Adjustable height with the leg extender (optional). Also available for the footrest.
Build-in electric + battery
Clement Function · Volden Function · Marina
Adjustment of the seating position
1. To recline, use the electric motion touch panel under the right arm. The buttons are perfectly placed for
adjustment of the back angle and the integrated footrest. There are four buttons – two buttons control the
back and two control the footrest. Recline back and stop when you reach the desired position. Use the
touch panel to bring the chair back to the starting point.
! Do not use unnecessary force when pressing the buttons. Otherwise, you might irreparably damage
the chair.
2. The headrest can be pulled up, pushed down and tilted forwards.
! You have to tilt the headrest to it's most forward position before you can tilt it back again. Do not use
unnecessary force when adjusting the headrest. Otherwise you might irreparably damage the chair.
3. Clement Function and Volden Function: Adjustable height with the leg extender (optional).
29

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

VoldenMoreElegantChesterAarhusSkagen ... Mostrar todo

Tabla de contenido