Ford Distributing G19503040 Instrucciones Para El Uso página 11

1.0 FOREWORD
This booklet is an integrating part of the product, and must
be kept in a safe place for consultation during the whole life
span of the machine.
To install the hydraulic lifting kit of the mower, on versions
with mechanical lifting, it is necessary to remove some parts
of the equipment. Some pieces to be detached from the
equipment are indicated on page 3 (ref. 1).
Install the Kit following the instructions given on page 3 (ref.
2 to 11).
2.0 OPERATING INSTRUCTIONS
To connect the equipment to the tractor, carefully follow the
instructions given in the manual for use and maintenance
supplied with it.
2.1 POSITION SETTINGS
After installing the kit, look at the diagrams on page 2-3 and
pay attention to the following.
Remove the safety hook (A, Fig. 1) and store it in the housing
on the frame top (B, Fig. 2).
Adjust the height of the equipment with respect to the tractor,
by means of the chain (C, Fig. 3), moving the rings in the hole
of the plate (D, Fig. 3).
When you have finished making the adjustment, mark the
used chain ring to avoid having to repeat the above operation
every time you apply the equipment to the tractor.
NOTE: for further information on the use and maintenance of
the equipment, refer to the instruction booklet supplied with
it.
cod. G19503040
ENGLISH ENGLISH
ENGLISH ENGLISH ENGLISH
fig. 1
fig. 2
C
A
B
D
fig. 3
11