Ford Distributing G19503040 Instrucciones Para El Uso página 12

ENGLISH
For optimum use of the equipment, the mowing bar must jut
out completely beyond the tractor profile (Fig. 4).
Figures 5, 6 and 7 illustrate the way to obtain the best
equipment position setting according to different tractor tracks.
Figure 4 shows the different equipment position setting with
tractors having different tracks.
The figure alongside shows the positions that can be obtained
by moving the equipment frame joint:
E1- For tractors with normal track.
E2- For tractors with wide track.
E3- For tractors with narrow track.
When the frame joint is moved (E, Fig. 6), the position of the
stop bushing (G, Fig. 6) of the cylinder linkage must
consequently be changed, according to the cases shown in
figures 6 and 7.
Connections between frame joint and stop bushing for the
movement of the mowing bar.
12
USE AND MAINTENANCE
fig. 4
fig. 5
fig. 6
fig. 7
E1
G1
E1
E2
E
F
E2
F
G2
E3
G
E3
G3
cod. G19503040