Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
AW_26015_Userguide_VO2_2020
CAUTION:
Plastic bags can be dangerous. T o avoid danger of Suffocation,keep this bag away from babies and children.
INSTRUCCIONES DE USO:
OPERATING INSTRUCTIONS:
OSCILLATING CONTROL
The oscillating control button is located on top of the motor housing. Simply depress the button to start. Lift the button to stop.
CLEANING THE BLADES
To clean the blades, simply lift the 4 clips on the rim of the fan guard and pulí the guard forward.
AS SEMBLY:
PARTS AND DESCRIPTION
This marking indicates that this product should not to be disposed with other
household wasters throughout the EU. To prevent posssible harm to the
environment or hueman health from uncontrolled waste disposal, recycle it
responsibly to prmomote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact
the retailer where trhe product was puchased. They can take this product for
environmental safe recycling.
1)
Insert the Stand Pipe into the base and secure with the 4 screws
provided "D"
2)
Pull Pipe Cover down to the bottom of the Stand PIPE
3)
Insert Extension Tube into Stand PIPE
4)
Loosen Nut "C", then place the Switch Box over the Extension Tube and
tighten with screw "A".
5)
Place the front grille onto the rear grille and fix together with the
safety screws
6)
Remove plastic sleeve from Motor Shaft
7)
Place Rear Guard in front of Motor and fasten it with the nut provided
8)
Insert Blade into Shaft and fasten it with the Blade Spinner
9)
Hang the Front Guard on the hook of Rear Guards and fasten both
guards together with the clip.
Publicidad
Tabla de contenido
