CORE EDM E-43M Instrucciones De Uso página 5

Leveling method - 2
1. Place the level in the Y-axis direction.
2. If the position of the water drop is at the front side, the front side is
high.
3. Turn the leveling bolt on the machine's front side counterclockwise
to lower the front part.
4. Turn the leveling bolt on the machine's rear side clockwise to raise
the rear part.
5. Balance the left and right leveling bolts.
6. Adjust water drop to the center.
-5-
<Note> Use of a 30 mm spanner is recommended.