Dell Networking C1048P Guía De Introducción página 13

LED Description
Stack master status
Stack
• Off: The PE is operating as a stack member.
Master/Member
• Solid green: The PE is operating as a stack master or in
standalone mode.
• Blinking green: The PE is operating as the stack
standby master.
SFP+ LNK (left SFP+ link status
LED above port)
• Off: No data link
• Solid green: Link is up and operating at maximum 10G
port speed.
• Solid amber: Link is up and operating at lower 1G port
speed.
SFP+ ACT (right SFP+ activity status
LED above port)
• Off: No data link activity
• Flashing green: Link is up and transmitting/receiving
data.
C1048P Back Panel
The back panel of the C1048P PE is shown in the following illustration and
described below.
Figure 3. C1048P Back Panel
11