Mounting Options - ENJOYABLE WARMTH IH Serie Manual Del Usuario

Owner's manual
•
An ambient temperature between -30°C and +30°C.
•
Rated voltage: 220V – 240V alternating current
•
Rated frequency: 50Hz/60Hz
•
Relative humidity: less than 95%
Furthermore, the following requirements should be met:
1. Qualified installer: The installation process should meet national
electrical safety standards. The installation personnel should be
certified.
2. Installation conditions:
a. Supply voltage fluctuations should be within ± 10%. If this
b. Electricity lines should be equipped with earth leakage
c. A ground wire should be connected to the grounding
Electrical parameters:
Model
IH-2400-D
IH-3200-D

2.4. Mounting options

The IH-xxxx-D infrared radiant heater series can be mounted against a
ceiling (preferred) or against a wall.
is not the case, the electrical installation needs to be
revised before installing the heater.
protection devices and a master switch.
device of the building. Please consult a professional,
certified electrical installer if this is not the case.
Power (W)
current (A)
2400
3200
IH-xxxx-D series infrared heater
Rated Voltage (V)
10.4 220 – 240
13.9 220 – 240
Page 9 / 198
Cable length
(mm)
2000
500
Version 1.3