Memory Reset - J.R. Automatismos DS191 SW MV Manual Del Usuario

WOLF SW MV: CONTROL BOARD FOR SWING GATES
** THE RED BUTTON IS LOCATED ON THE RECEIVER'S CARD (PERPENDICULAR TO THE BOARD) AND THE LED THAT
FLASHES ASWELL.
DIGITAL PROGRAMMING OF MANEUVER TIME WITH THE COMMAND
1. - Record two buttons of the remote on the "RX MULTI" receiver on the control board. The first button
will be recorded in "CHANNEL 1" and will control the master gate. And the second button will be
recorded in "CHANNEL 2" and will control the slave gate.
2. - Once we have made step 1, press the "PROG TIME" button on the control board, the led will
remain fixed (programming is open).
3. - Press "BUTTON 1" of the remote the master door will begin to open. Wait for a time and press
"BUTTON 2", the slave door will begin to open.
DIGITAL TIME PROGRAMMING AND AUTOMATIC CLOSURE

MEMORY RESET

16