Energy Saving; Software Updates; Using A Chargepak - Marshall PURE EVOKE-1S Manual De Instrucciones

Energy saving

EVOKE-1S Marshall is part of the PURE EcoPlus product family, designed and manufactured
to minimise power consumption when the unit is switched on and to use less than 1 Watt in
standby. One way this low power consumption is enabled is by not collecting and storing Intellitext
messages when the unit is in standby. You can override this option by switching off energy saving
mode, but this will increase standby power consumption. Two options are available:
Energy saving On (the default setting)
EVOKE-1S Marshall updates the Intellitext data when you tune to a station that broadcasts
Intellitext. Intellitext data is not collected in standby.
Energy saving Off
EVOKE-1S Marshall collects Intellitext data in standby from the last station you tuned to with
Intellitext, which increases standby power consumption.
Note: if you fit the optional ChargePAK E1 (see below) the unit will switch off when you press the
Standby button and not enter standby, as long as the unit is not connected to mains power.

Software Updates

Software updates for your EVOKE-1S Marshall may be made available in the future. If you register
your product and include a valid e-mail address you will receive notification of software updates.
Alternatively, visit http://support.pure.com at any time to check for available software updates.
To update your software
Connect your radio to your PC using a suitable USB cable. Follow the instructions provided with
the software download at support.pure.com.
Note: USB update requires a PC (not Mac) with internet access running Microsoft® Windows XP
or higher and a suitable USB cable (not included).

Using a ChargePAK™

ChargePAK E1 is a rechargeable battery pack which plugs into the socket in the radio's battery
compartment. Whenever your radio is connected to a mains supply the ChargePAK will charge
up and the power remaining will be available to view as a percentage in the Information display
options (page 5).
To purchase a PURE ChargePAK E1, contact your nearest PURE dealer, or visit www.pure.com
Important: EVOKE-1S Marshall can only be powered by ChargePAK E1 and is not compatible
with any other batteries, either disposable or rechargeable, or any other ChargePAK model. Always
switch the unit off and disconnect it from mains power before inserting or removing a ChargePAK.
Charge a new ChargePAK for 24 hours before first using battery power.
12
(Menu > Energy saving)
(Menu > Upgrade)
+ +
ChargePAK
™