MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.
DO NOT IMMERSE HEATER IN WATER!
WARNING: In case of malfunction or doubt, do not try to repair the heater
yourself. It may result in a fire hazard or electric shock.
CLEANING:
Clean
vacuum cleaner. This will remove lint and dirt from the inside of the heater. DO NOT
ATTEMPT TO TAKE HEATER APART. Clean the body of heater with a soft cloth.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they
will damage the heater. NEVER USE ALCOHOL OR SOLVENTS.
STORAGE: Return carton for storage of heater, wrap and tie cord to avoid damage
when store.
TROUBLESHOOTING
If your heater fails to operate:
•
Check if the power cord is plugged into an electrical outlet, if not, plug in.
•. Check if electricity to the main fuse is working.
•
The thermostat might be set too low. Turn the Thermostat Control clockwise
until the heater
•
Make sure the electrical outlet or circuit breaker is working
•
Check for obstructions. If you find an obstruction turn the heater OFF, and
UNPLUG THE UNIT. Carefully remove the obstruction and follow the reset
instructions.
the heater grills with the vacuum brush attachment on your
begins working.
properly.