Skiddoü Sunt Manual De Usario página 10

Trona para comer
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
tinfoil, cardboard, etc.). These elements pose a suffocation hazard to
the child.
1.
List of main parts
2.
Assembly and functions
A.
Leg assembly:
Start by forming pairs of top and bottom legs (A-A, B-B , C-C, D-D). Next, screw the top and the
bottom leg together, put inside the opening in the seat and fix using the screw (5), as shown in Fig.
1C. Repeat the steps for the three other legs. Make sure that the legs with the footrest openings
are installed in the front. Make sure the legs are tightened correctly and the product is stable.
Take note of Figure 1D, presenting correct leg positioning and placement on the ground..
B.
Footrest assembly:
Adapt the footrest (4) to the leg openings and tighten using screws (5), as shown in Figure 2A.
NOTE!: Do not let the child stand on the footrest and use it as a step!
C.
Tray assembly:
Pull the buttons (7) and slide the tray as shown by the arrow shown in Figure 3A, until the
characteristic sound of the lock is heard. The tray may be adjusted in one of 3 positions. Once
the tray is assembled, make sure it is placed correctly and precisely. To remove the tray, press
the buttons releasing the latching mechanism (7) and pull the tray. The outer layer of the tray
may be removed for cleaning, by unlocking the two fixtures, as shown in Figure 3B. To reassembly
the internal tray, put it above the tray and press the locking buttons until the tray is locked in
position.
D.
Use of safety belts:
To secure the child in the high chair, check if the locks of the hip belts and the shoulder straps
are well connected or connect them, if necessary, then slide them into the buckle of the crotch
strap (Fig. 4A), until latched in place. Next, adjust the shoulder strap and the hip belt to the body
size of the child (Fig. 4B). Press the central button to release the belt. Caution! Use of the tray
alone does not protect the child against falling out. Belts should be used to ensure safety of the
No.
1
Seat with a cover and safety belts
2
3
4
5
6
7
Tray adjustment/assembly button
element
2.1 Top legs
2.2 Bottom legs
Double tray
Footrest
Assembly screws
Leg pads in the low chair
9

Publicidad

Tabla de contenido
loading

Tabla de contenido