Publicidad
CERTIFICATE FOR TEST AND EXAMINATION AFTER INSTALLATION
1 Description of installation
Location:
Rated load: kg
Rated speed m/s
Contract electricity supply:
Fuse rating
2 Rail
1) Confirm the railjoint fixations
2) Confirm the support fixations
3 Electrical drive unit tests
1) Confirm that the batteries do not leak:
2) Confirm that the batteries are securely fitted in
the carriage structure
3) Confirm that it is effectively indicated to the user
when the stairlift is brought to rest out of reach of
the charge contacts:
4) Confirm that the carriage chassis is effectively grounded:
5) Confirm that the polarity of the battery
connection is correct
4 Clearance dimensions
1) Confirm the correct clearance dimensions of chapter 6
5 Mechanical tests
1) Confirm that the final limit switches operates correctly
Upper switch:
Lower switch:
2) Confirm that the joystick on the carriage and all landing controls
operate correctly
3) Confirm that the sensitive edges and surfaces operate correctly
4) Confirm that the swivel seat interlock and switch operate correctly
5) State the stopping distance of the carriage (with rated load) upon
application of brake
up
down
6) Confirm that the emergency operation mechanism
operates satisfactorliy conform chapter 7
7) Undergo without failure a dynamic test to check the forces
8) Confirm all stickers have been applied to the product imposed by the
maximum working load
Manufacturer:
Stairlift serial no:
Type
V
Phase
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
N/A
Yes
mm
mm
N/A
Yes
N/A
Yes
N/A
yes
Hz
Publicidad
