KTM Sportmotorcycle HUSABERG 81203094000 Manual Del Usuario página 4

4
3
5
Scope of delivery:
1x frame protector, left
1x frame protector, right
2x bushes for frame protector
2x dummy plug-in nuts
2x oval head screws, M5x25
5x cable ties, 300/4,8mm
1x cable tie, 141/3,6mm
Assembly
- Remove plugs (1) on the left and right sides.
1
- Insert dummy plug-in nuts (2) on the left and right sides.
2
- Position the frame protector on the left and right.
NOTE:
With the right frame protector, make sure that the loop (3) engages under
the rearend.
- Connect the frame protector left and right using the bushes and the
oval head screws (4).
- Tighten the oval head screws until the bush is flush on the
frame protector.
4
Do not overtighten screws.
- Fix the cable binders in the grooves provided on the left and right sides.
- Cut off excess amount of cable binder.
NOTE:
You can also fix the frame protector to the brake container of the rear brake
(5).
54803092060
54803092050
0738050250
44011076305
K7200001174