medlounger MODULAX Manual Del Usuario página 9

EN
Remote Type B Functions
Recline the backrest
S1 01
Return backrest to
S2 01
upright position
a) In starting position, raise
01 S3
the seat height by 8 degrees.
b) In a relaxed position, incline
an extra 8 degrees.
Reverse the function of
01 S4
button 3, returning seat to
original position
S5 01 Recline the backrest
Raise the footrest
01 S6
Press and hold to return
01 S7
all functions to the original
upright position
Warning!
**For safety purposes, be careful
when using the memory button that
the area around the recliner is clear of
any possible obstructions. **
Memory Function 1
S8 01
This button allows you to save your favourite
position for the recliner functions.
Step 1: Starting from the original upright
position, use buttons S1-S6 to reach the
position that you would like to save. For
example, you may want to have the
footrest completely raised and the
backrest halfway reclined.
Step 2: Once you have reached your
desired position, press S8 and hold it for
3-5 seconds. You should hear a small
"beep" sound, this means that your
position is saved.
Now, any time that you press S8
(just press, don't hold), the recliner will
automatically go to your saved position
01 S9 Memory Function 2
This works exactly the same as S8, so
you can use S9 to save a second
position. Follow the instructions as
above to save your second position
S10 01 USB charging point
Remote Type C Functions
Recline the backrest
01
Return backrest
02
to upright position
a) In starting position, raise
the seat height by 8 degrees.
03 03
b) In a relaxed position, incline
an extra 8 degrees.
Reverse the function of
04
button 3, returning seat
to original position
05
Raise the footrest
06 Lower the footrest
USB charging port
07
EN
17 of 97