FINOPOLY 51615 Información Sobre El Uso página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
1. Fields of application
The FINOPOLY Polishing Lathe is a powerful motor,
whose construction was specifically designed as a
polishing lathe for dental technology.
2. Advantages
• Easy operation
• Sturdy construction
• High performance
• Maintenance-free
3. Safety precautions
3.1. Marking of information
Before you start operating the unit
it is positively necessary to read
the user information carefully and
to store it closely at hand.
This symbol marks safety informa-
tion, whose non-observance may
cause hazards for the unit and its
function.
This symbol marks safety informa-
tion whose non-observance may
cause hazards to persons.
This symbol marks tips or informa-
tion, which may facilitate your
work and ensure a safe operation.
4. Hazard information
It is recommended to wear protective eyewear and a
protective mask when ever the FINOPOLY Polishing
Lathe is operated.
If damages at the connecting cable or plug are visi-
ble the unit must be put into operation.
The FINOPOLY Polishing Lathe operates with very
high rotational speeds. If not used according to
specifications or during work, which deviated from
normal dental technological applications, the unit is
to be regarded as hazardous for the operator and
all persons in its immediate neighbourhood.
Never try to block the rotation of the spindles with a
foreign body respectively with an object that is not
processed or with the hands. This can show to be
extremely dangerous for the user as well as for the
unit.
5. Characteristics
The unit is designed for permanent operation. The
shafts are prepared to take standard spind les. The
FINOPOLY has a low-noise motor and maintenance-
free special ball bearings. The housing has a broad
base with rubber feet, which improves stability and
supports self-cooling. The high performance of the
motor guarantees a stable speed of 1400 respectively
2400 rpm. After a power cut the unit does not start
automatically but it has to be switched on again.
When the polishing lathe is switched on both shafts
start to rotate simultaneously. The design of the unit
ensures that brushes do not come in contact with the
housing.
6. Place of installation
Take care that the installation surface is level
and plain. The high own weight and the
special rubber feet ensure a stable stand of the lathe
even on smooth surfaces. Place the connecting
cable in a way that nobody can trip over.
7. Commencement of operation
Please check the unit for transportation
damages immediately after unpacking. All
transportation damages have to be claimed prompt-
ly. At first check if the voltage indication on the type
label of the unit matches the voltage of your mains
supply. Is this the case you can plug the unit into the
socket.
ENU
3

Publicidad

Tabla de contenido
loading

Tabla de contenido