Wagan Tech Brite-Nite 2541 Manual De Usuario página 6

2 Million Brite-Nite
SERVICING
Halogen Bulb
1. The spotlight uses a 6V 55W H3 halogen bulb. Please go to your local automotive or
hardware store for a replacement when the bulb has burned out.
2. Unscrew the lamp face and carefully change the bulb.
3. The WHITE wire of the replacement bulb connects to the unit's RED wire.
4. The BLACK wire of the replacement bulb connects to the unit's BLACK wire.
5. After replacing the halogen bulb, screw on the lamp face, making sure a tight fit to
ensure no water will enter the housing.
6. NOTE: BE SURE TO NOT TOUCH THE GLASS OF THE HALOGEN BULB, AS DOING SO
MAY CAUSE THE BULB TO SHATTER. Please refer to the instructions found on the new
bulb for other safety precautions. Always wear safety glasses when working with
hardware
LED Lantern
The LED lantern uses bright LEDs that do not need changing. The lifespan of the LEDs should last
up to 10,000 hrs. Do not attempt to alter or change the LEDs.
DISPOSAL/RECYCLING
All electronic equipment contains materials that can damage the environment if not properly
disposed of. Contact your local authority for disposal or recycling instructions.
5
LED Lantern
™ ™
www.wagan.com
by Wagan Tech
®