Updating Firmware - FLUXERGY 5506-CE Manual De Instrucciones

UPDATING FIRMWARE

In Fluxergy Works, Click the "Admin" tab on the left side of the screen.
01
02 Select the Firmware tab.
Select the Firmware Source dropdown, and pick "LOCAL".
Select the "Check for Updates" button.
03 Navigate to the patch file and select it.
Any device with a firmware version lower than patch will have its update icon enabled (by default they are
greyed out).
Select the update icon:
04
You will get a brief popup and then the firmware version will either rev up, or you'll get an error message.
05 Wait ~5 minutes. Device will show as "unavailable" during this time.
Once device is "available" again, then you can use the system.
If you receive an error message immediately, or if the device is still 'unavailable' after 10 minutes, contact
customer support.
14
Instruction Manual (PN: 5780C04)
Version Date: May 5, 2021