Installation And Troubleshooting; Setting Up Fluxergy Works Software; Setup Guidelines - FLUXERGY 5506-CE Manual De Instrucciones

INSTALLATION AND TROUBLESHOOTING

Setting up Fluxergy Works Software

1. Download and install the Fluxergy Works software. If software came pre-installed, skip to device setup.
2. Enter the serial number provided to you by Fluxergy.
a. Note: there is a one-time activation process which requires an internet connection. Work with your IT
department to ensure ports 80 (http) and 443 (https) are open. After activation internet access is no
longer necessary.
3. After installing software, create an administrator account.
a. Note: the administrator account created during Fluxergy Works install is the master administrator and
cannot be edited by other administrator accounts.
b. Note: if the master administrative account password is lost, it cannot be reset. To mitigate the risk of
losing all administrative access, Fluxergy recommends creating a secondary administrator account
immediately after install.
4. Information regarding how to run the software can be found in the following sections.

Setup Guidelines

Set up your analyzer on a level surface in a cool dry space, making sure that the fan in the back of the analyzer will
not be obstructed, and that there is enough room for ventilation, at least 6 inches of space around the device.
Next, we will show you two methods of setup: creating an intranet between your device, router, and computer, and
connecting your analyzer to your network.
8
Instruction Manual (PN: 5780C04)
Version Date: May 5, 2021