7hSevenOn Home 26075 Manual De Instrucciones página 5

3- Operation of pesaje
· In the first place it plant the scale in a flat and stable surface. Presione The button ON/TARA to begin the pesaje.
After some seconds, the screen will put in 0.
· It plant an object in the scale. The LCD indicates the weight of the object; presione the button TARA.
· It keep put the object. The screen indicates the weight of the last object situated on.
· Withdraw all the objects. The LCD indicates the current weight in negative. Presione ON/TARA to go back to 0.
4- Symbology
· Batteries exhausting:
· When the batteries are very low and the scale can give erroneous values, will indicate the following:
· Indication of unstable zero: if the symbol "unSt" shows in the screen LCD, means that the weight in the scale is not
stabilised, or that the scale is not planted on a hard surface, levelled and flat. It plant the scales inor na flat and
stable surface and try again.
· Indication of overloads:
5- it Remember
· Ensure that the scales is planted in a flat and firm surface.
· The scales is not waterproof. It do not expose it to the humidity.
· It clean the scales with a slightly humid cloth. It do not use any product of chemical or abrasive cleaning.
· It withdraw the batteries if the scales does not go to be used by a long period of time.