Charging Method - ANLAN YD760 Manual De Usuario

Charging display:
When the battery charge is insufficient, the indicator
lights of the three modes are blinking red.
When charging, the indicator lights in the three modes
are flashing white.
When fully charged, the indicator lights in the three
modes are lit in white. (Caution: The charging time may
vary depending on the charging environment.)

Charging Method

Be sure to use the working voltage, AC adapter, etc.
under the conditions specified in this manual.
If you are using the product for the first time or if you
have not used it for a long time, charge it before using it.
Also, to protect the built-in battery, charge it once a
month even if it will not be used for a long time.
Please do not use while charging.
Unplug the cable when charging is complete to prevent
overcharging. If you continue charging for a long time
after charging is completed, the built-in battery will be
consumed and the life will be shortened.
A suitable room temperature for charging is 15-30 ° C.
Charging at low temperature may shorten the battery life,
so charge at an appropriate temperature. In addition, the
charging speed may decrease below about 0 ° C.
When charging with the USB port of a computer or a
mobile battery, it may take longer than usual to charge.
(When charging with a cable other than the attached
dedicated cable and specified voltage, charging may not
be possible depending on the specifications.)
The main unit may become slightly hot during charging,
but this is not a malfunction.
If the operating time is abnormally short even when the
battery is charged properly, contact customer service if
it is determined to be an initial failure.
Maintenance
Do not wash the main unit with water. If it gets dirty,
wipe it gently with a damp cloth that has been wrung
out tightly. Also, do not wipe with solvents such as
benzine and thinner.
If you feel any pain or abnormality on your skin or body,
stop using it immediately and consult a specialist.
If you feel the main unit is hot, stop using it immediately.
This product provides eye care. Please do not use it for
any purpose other than its intended purpose.
If the product is damaged, malfunctions, deformed, or
the cord is broken, discontinue use.
If smoke, offensive odor, abnormal heating, etc. occur,
immediately turn off the power of the main unit and
stop using it.
This product is not waterproof. Never use it in a humid
place such as a bathroom. There is a risk of burns,
electric shock, and malfunction.
Do not use with wet hands or with water or dust on it.
If the main unit becomes dirty, wipe it gently with a
damp cloth that has been wrung out tightly. Also, do not
wipe with solvents such as benzine and thinner.
Do not use while driving a car or bicycle.
Do not leave the product in direct sunlight or near a
heating device.