Meanail Sphere Guía De Utilización página 13

HOW TO USE THE SPHÈRE LAMP ?
1. Plug the AC alimentation cord to your lamp (Key 6) and plug the device to your power outlet.
The lamp automatically turns on.
2. Press the « ON/OFF » button for 2-3 seconds to turn the lamp on, set the timer to no limits
or turn off the lamp.
3. Put your hand or feet under the lamp and press the adapted timer button to catalyse your
semi-permanent polish (10, 30 or 60 seconds). (Good to know : if the timer is in use but you
want to choose another catalysing time, press the « ON/OFF » button again, then choose the
desired timer length).
4. After use, press the « ON/OFF » button to reboot the timer and unplug the device.
Catalysation length choice
• Catalyse 10 seconds for thin semi-permanent layers (such as the polish Colors, base coat...)
• Catalyse for 30 seconds for thicker semi-permanent layers (such as Peel Off varnish).
• Catalyse for 60 to 99 seconds for acrylic gel, nail extensions and all other semi-permanent
manicures that demand an extensive catalysing.
Don't hesitate to repeat if your nail polish isn't completely dry.
CLEANING
Wait for the lamp to be unplugged and use a dry duster to clean the lamp of eventual dirt.
For any question in relation with the product or the use of the Sphère lamp, do not hesitate to email us at support@plastimea.com or via the Amazon support.
MÉANAIL PARIS SAYS
Before catalysing your nails, remember to groom
your hands.
1. Clean and hydrate your hands.
2. Push back your cuticles: with the help
of a wooden cuticle pusher, push back
the cuticles to free the nail and achieve
a perfect contour. Tip: To make it easier,
soften your cuticles by preventively
putting them in warm water.
3. Sand down and fi le your nails: with a
buffer block and a nail fi le, fi le and sand down
your nails to have the desired nail contour. Make sure
to always fi le your nails in the same way, especially if your
nails tend to break or split.
4. Degrease your nails: with the help of a Cleaner, clean the nail and remove
dirt and dust.
To apply and remove the varnish, please refer to the user guides of your semi-
permanent varnish.
User Manual