Front View; Rear View - GABA GLV-2404 Manual De Usuario

Front View

-
1. Working light
Green: normal working
Red: Standby status
2. Infrared sensor
Operate the remote control by
pointing it here

Rear View

-
U s e r M a n u a l f o r G L V - 2 4 0 4 L E D T V
1.Power indicator
Green: Normal playing status
Red: Standby status
2. Infrared remote sensor
Point remote control at this sensor conduct
remote control.
3. SOURCE/INPUT
Press this button to display the selectable
signal source for main source.
4. MENU
Press this button to display the selectable
signal source for main source.
5-6. VOL +/-
Press these two buttons to increase or
decrease the volume or operate menu.
7-8. CH +/-
Press these two buttons to select channels or
operate menu.
9. POWER
Press this button to enter standby mode under
normal play, and press this button, to enter normal
play mode under standby mode.
- You can Switch ON and OFF the TV.
1. EARPHONE: To connect to the earphone or
headphone, or speakers.
2. VGA: To connect PC video.
3. SCART: To connect to the VCR, DVD player or
other AV devices with SCART output socket.
4. PC AUDIO: To connect PC audio.
5. RF/TV: To connect to the aerial socket on the
wall with the RF coaxial cable.
6. COAX: To connect the audio socket to the
digital/standard 5.1 audio system.
7. HDMI/ARC: To connect to HD signals output
device, such as a set-top box, blu-ray disk player or
AV receiver.
8. USB: Connect to USB flash driver to play
supported multimedia content.
9. MINI AV: To connect to the Composite Video
(L/R) output sockets on external video devices.
10. MINI YPBPR: To connect to a DVD player,
Digital set-Top-Box, or other AV devices with
component (YPbPr) video and audio output.
11. CI+: Allows the insertion of Common Access
Module.
ENGLISH
Page: 4.