Cleaning And Storage; Troubleshooting - MINERAL air MU-100 Manual De Instrucciones

Cleaning and Storing
Everyday Cleaning
CLEAN THE NOZZLE
Wipe any cosmetic residue from nozzle with
cotton swab or tissue.
CLEANING THE RESERVOIR AND BASE
If there is any cosmetic residue on the rubber
tab and /or reservoir, wipe with a soft tissue or
cloth saturated with Mineral Air Cleaner.
*To avoid cosmetics drying out and becoming hard
in the reservoir ensure the rubber tab is closed and
attach the cap on after each use.
Regular Cleaning and Maintenance
* If cosmetics are left inside the reservoir for an extended
period, it may dry and harden.
* Clean and maintain the device regularly for long term use.
CLEANING INSIDE THE RESERVOIR
(ONCE EVERY 10 DAYS)
Clear out any remaining cosmetics in the reservoir
by misting until empty.
Detach the reservoir from the base. Fill the
reservoir with Mineral Air Cleaner and close the
rubber tab. Shake about 20 times and allow to
soak for at least 1 hour. Reattach the reservoir to
the base.
Clear out all the cleaning liquid from the reservoir
by misting until empty.
* Before your next use, fill the reservoir with Mineral
Air cosmetic products and prime the nozzle by misting
onto a tissue until product mists evenly.
SURFACE OF THE DEVICE
CLEANING THE
Using a damp cloth or tissue, wipe off any dirt or
cosmetic residue from the surface of the device.
* If the unit is still dirty, use a sponge or cloth soaked
in Mineral Air Cleaner or a gentle,
diluted detergent.
* Never use alkaline detergents, alcohol,
thinner, benzene, or nail polish remover.
9
How to Store
●
If you will not be using the device for an extended
period, clean the reservoir before storing.
●
When not in use, unplug the USB cable from the
device to store.
●
When not in use, store the device standing up and
make sure to close the rubber tab and attach the cap on.
●
Do not use or leave the device near stoves or
heaters, under direct sunlight, in humid places such
as the bathroom, or in an unstable environment.
●
Keep this device out of the reach of children or pets.
Maintenance and Inspection
●
If you have not used the device for an extended
period, inspect it carefully and check that the device
works properly and safely.
●
If there is any evidence of a malfunction, refer
to the "Troubleshooting" section (p.10-11) before
calling for service.
●
If the device malfunctions, appears damaged, or
needs service, please contact customer service.

Troubleshooting

Checklist for Possible Problems
If you encounter any problems during use, please
check these troubleshooting solutions before calling
for service.
Problem Possible Cause
Power does Battery not
not turn on charged
Device does Not plugged in
not charge correctly
Solution
Fully charge
the battery
(see p.6)
Plug in correctly
(see p.6)
10