Publicidad
Idiomas disponibles
Idiomas disponibles
• Contents should not be left in the bottle for longer than 24 hours. As soon as possible after each use,
wash all parts with warm, soapy water. Rinse all parts thoroughly with clean water. Allow all parts to
dry completely prior to next use or storage.
• To allow venting and prevent nipple/soft spout/valve collapse, do not over-tighten cap when reassembling product.
• DO NOT use abrasive cleaners or scrubbers since they may dull the finish.
• DO NOT use bleach or cleaners containing chlorine on any parts of the product.
• This product is sterilization safe.
• This product is top-rack dishwasher safe; however, washing by hand is recommended as the dishwasher uses
harsher detergents and hot water that may a ect the appearance of your product.
• Residual liquids or other contents may become trapped between product components, such as cap parts, the
bottle and the sleeve, gaskets (flexible band around inside of cap), or straws (if present in the product). Although
this product is top-rack dishwasher safe, washing by hand is recommended to ensure that these parts of the product
are thoroughly cleaned.
• The silicone sleeve helps provide grip but DOES NOT guarantee against breakage. If dents or scratches appear on
the bottle, your product's thermal retention may have been compromised.
• Volumetric measurements (if present) are approximations only.
• Choose the appropriate cap style for your baby's age and needs. Certain caps might not be right for every baby.
Consult with your pediatrician should you have any feeding problems or questions.
Assembly & Use
Stainless Steel Vacuum Insulated Wide Mouth Baby Bottle with Nipple or Soft Sippy Spout:
1. Remove lid (A) by twisting counterclockwise.
2. Remove dust cap (A1) by pulling upwards.
3. Remove stopper (A5) from underside of lid ring (A2).
4. Pull out nipple/soft spout (A3) from underside of lid ring
(A2) to completely remove it.
5. Silicone sleeve (C) on bottle (B) does not need to be removed.
6. Wash all parts separately with warm, soapy water and allow
to completely dry before re-assembling.
7. Ensure nipple/soft spout (A3) is properly seated inside lid ring
(A2) to minimize leaking.
a. Use stopper (A5) when storing liquids in bottle or bringing bottle
while on-the-go. Do not use stopper while child is using the bottle.
8. Fill bottle with contents. Do not overfill: leave space for lid (A) to avoid overflow.
9. Replace lid (A) by twisting clockwise.
* Image for reference only: actual product may vary
A1
A1
A2
A
A2
A3
A3
A4
A4
A5
B
B
C
A
C
Publicidad
