Publicidad
Idiomas disponibles
Idiomas disponibles
5. Fill bottle with contents. Do not overfill: leave space for lid (A) to avoid overflow.
6. Feed baby from container udner adult supervision only, especially when product contains
hot contents - hot foods can burn or scald user.
7. Replace lid (A) by twisting clockwise.
Stainless Steel Vacuum Insulated Wide Mouth Baby Bottle with Straw Cap:
1. Remove lid (A) by twisting counterclockwise.
2. Remove silcone gasket (B) from underside of lid (A).
3. Pull straw stem (C) out of underside of lid (A).
4. Silicone sleeve (E) on bottle (D) does not need to be removed.
5. Wash all parts separately with warm, soapy water and allow to completely
dry before re-assembling.
6. Fill bottle with contents. Do not overfill: leave space for lid (A) and straw (C)
to avoid overflow.
7. Replace lid (A) by twisting clockwise.
8. To drink, pull the notch (A1) on spout towards you until it reveals the spout opening.
9. When finished drinking, close the spout (A1) by pressing down on it until it snaps securely into place.
Note: Check straw stem regularly for tears and replace immediately if damaged or worn.
Warnings
• NOT FOR USE WITH HOT LIQUIDS: For cold liquids only. Hot liquids may burn or scald user.
• To help avoid possible injury, DO NOT let child chew or teethe on any part of the product including the
soft or hard material of the spout as small parts may break o and may present a choking hazard.
DO NOT let child walk or run with product.
• DO NOT leave children unattended with this product. Use only with adult supervision and always test
temperature of food or liquid before feeding to your child, especially if product contains hot contents—
hot foods or hot liquids may burn or scald user.
• Always use care to maintain product in an upright position when transporting or carrying product. DO
NOT place product in a diaper bag, backpack, carrying bag, or other container in which product may shift
from an upright position. Liquid contents may leak and scald user or cause property damage.
• DO NOT overfill product: leave space at top of the container for cap, straw (if present), stopper (if present),
and valve (if present), to avoid overflow. Overflow of hot foods or liquids can burn or scald user.
• DO NOT leave nipples, valves or soft sippy spouts in direct sunlight, heat or sterilization fluid longer than
recommended as this may weaken the silicone.
• DO NOT use tools or devices to force bottle to open.
• If you are unable to open the bottle by hand, DO NOT open it and dispose of it at your local waste facility.
* Image for reference only: actual product may vary
A1
A
B
C
D
E
Publicidad
