Instruction Manual; Important; Safety Directives; Unpack - TISSIDental AIRBOX GS Manual De Manejo

TISSI Dental
CONGRATULATIONS FOR YOUR CHOICE!!
Choosing this apparatus you have purchased a particularly reliable unitthatwill facilitate your work.

IMPORTANT !

Before installing the apparatus read carefully this manual and keep it for future consultations.
WARNING
Do follow carefully all the indications brought back in this manual. During all the maintenance operations di-
sconnect the power cord from the electrical outlet, and/or disconnect the compressed air and/or the water at-
tack and/or other attacks of external parts to the apparatus. Do not introduce stranger objects inside the unit
during the maintenance operations. Use only the accessories in equipment for the filling operations and/or main-
tenance. Do not execute different operations of maintenance from those brought back in the manual. Whiche-
ver operation not contempled in this manual, can involve risks. For operations of this type, contact the technical
service. Before turning on the unit and connecting the power cord to the electrical outlet, make sure that the vol-
tage corresponds to the one brought back on the fabrication nameplate placed on the back part of the appara-
tus.
CAUTION:
Do not make any maintenance operation when the power cord is connected: FULGURATION DANGER!
Use only genuine spare parts. Placing not genuine spare parts can void your warranty, moreover can
make the apparatus not in compliance with the norms, and dangerous when in use.
For whichever inherent information concerning installation, maintenance and use of the unit, con-
tact the customers' service TISSIDental:
Via Liberazione 58 - 20098 S.Giuliano M.se - Milano - Italy
Fax (+39) 02 98285327 - Tel. (+39) 02 98282694 - www.tissidental.com

UNPACK

Verify integrity of the pack at the moment of the reception of the apparatus. Verify that in the packaging all the
parts and the supplied accessories of series are contained together with the apparatus: power cord, suction
hose and connection, pack of 4 filters AIRBAG (rif. 14 - conf. 4 pz.), user's documentation and warranty.

INSTALLATION

Take the suction unit out of the packaging and place it where can be easily inspected for the replacement of
the recovery filter of powders AIRBAG (rif. 14) and for the periodic substitution of the filter for motor protec-
tion (rif. 12). ATTENTION: do not place the apparatus inside a piece of furniture without circulation of
air.
Open the lateral panel (rif. 33) rotating the two screws (rif. 32).
Insert the suction hose making a light pressure (rif. 5) in the appropriate metal ring (rif. 11).
Make sure of the proper placement of the recovery filter of powders (rif. 14) in the appropriate plexiglass con-
nection of the suction hose (rif. 5), then close the lateral panel (rif. 33).
Connect the power cord (rif. 1) in the plug of the unit (rif. 27) and the other head of the cord to a power ou-
tlet (absorption max 1000 W). ATTENTION: make sure that the voltage corresponds to the one brought
back on the fabrication nameplate placed on the apparatus.
Connect the other side of the suction hose (rif. 5) where you need to have the aspiration: AIRSTOCK - TISSI
(rif. 6/7/8/9/35 - cod. 110), benches, sandblasters, dry trimmers (for the use of the suction unit with a dry
trimmer it is recommended to connect it to a decantation box for dry powders type TRIMBOX - TISSI).
After these operations, the suction unit is now ready to work: turn on the apparatus by pressing the ge-
1