DWT WS10-125 LTN Manual Original página 5

Power tool specifications
Angle grinder
Power tool code
Rated power
Power output
Amperage at voltage
Rated speed
Max. Ø of cutting disc
Max. Ø of grinding disc
Max. Ø of rubber sanding plate
Max. Ø of circular wire brush
Max. Ø of cup wire brush
Spindle thread
Weight
Safety class
Sound pressure
Acoustic power
Weighted vibration
information
Always wear ear protection if the sound
pressure exceed 85 dB(A).
safety rules
WARNING - To reduce the risk of injury,
user must read instruction manual!
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and / or serious injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool�
Noise
General
[110-127 V ~50/60 Hz]
[220-230 V ~50/60 Hz]
[W]
[W]
110-127 V [A]
220-230 V [A]
[min
-1
[mm]
[inches]
[mm]
[inches]
[mm]
[inches]
[mm]
[inches]
[mm]
[inches]
[kg]
[lb]
[dB(A)]
[dB(A)]
[m/s
2
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents�
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes�
• Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to lose
control�
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
modified plugs and matching outlets will reduce risk
of electric shock�
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded�
English
5
WS10-125 LTN
744320
745044
1000
600
10
5
] 9000
125
5"
125
5"
125
5"
75
3"
75
3"
M14
5/8"-11UNC
1,7
3�75
—
—
] —