Replace Battery; Replace Fuse; Equipment; Assembling Wrist-Strap - USAG 075 E Manual De Instruccion

Replace battery (two battery 1,5V type AAA)
Attention: before replacing battery, remove the testing leads from
testing point and turn power off.
When " " signal appears, should replace battery as below:
• unfixing the battery case.
• Take out the old battery and replace a new one.
• It's better to use alkaline battery for longer life.
Replace fuse (n° 1 da 0,5A - 250V)
Attention: before replacing fuse, remove the testing leads from
testing point and turn power off.
• Unfixing the rear cover and replace the fuse.
• Use the same as specified.
• Fixing the rear cover.

Equipment

• Set of test leads
• Holster
• Temperature probe K type
• Belt/armlet
• Carrying case (nylon)
• Operating manual

Assembling wrist-strap

See
fig. 2
Fig. 1
Lift
to set free
Pull
to squeese
Fig. 2
20
Bukle