Working Mode - Rexing H6 Manual Del Usuario

detected by the front motion sensor. By this way, you can
align the camera to the best angle and distance.

Working Mode

Switch the Mode Button to "On". After turn on the camera,
the screen will display 15 seconds countdown. Then the
LEDs and screen will go out. The camera begins to operate
independently and enter standby mode.
If the wild animals enter the detection range of the motion
sensors, the camera will be activated and detect the motion
trail.
If the wild animals continue to move to the detection zone of
the sensor, The camera will be activated immediately, and
according to the working mode set in the menu, take photo
or video or take photo + video, after shooting, the camera
will return to standby mode; the camera will delay the
interval according to the motion sensing set in the menu
Time, waiting for the next sensor trigger and shooting.
Day mode
In the daytime or in a brighter environment, the camera
automatically turns on the daytime camera to shoot high-
resolution color images with normal brightness during the
day.
15