Power Supply - Rexing H6 Manual Del Usuario

Power Supply

Please install batteries before using the camera.
♦ Open the camera case and remove the battery cover.
Install 8 pieces of 1.5V AA brand batteries. Please make
sure the electrode is correct.
♦ If the camera is in low power, please connect the camera
to a power adapter(not provide) for power supply.
Inserting Storage Media
Please prepare a Micro SD card and insert it into the
camera for saving more files. Before recording, please
format the memory card first.
♦ Support Micro SD card, up to 512GB. Suggest to use at
least class 6 or above high speed card.
♦ To avoid malfunction, the memory card should be far away
water, strong vibration, dust, hot source and direct sunlight.
♦ Do not insert the memory card forcibly. Please refer to the
marking on the camera.
♦ For the first time use, please wait for the memory card
temperature reach the ambient temperature. The camera
will be short-circuit influenced by environment temperature
4